As a seasoned provider of aircraft hangars, I understand the critical importance of ensuring seismic resistance in these structures. Aircraft hangars are not only shelters for valuable aircraft but also vital components of aviation infrastructure. In regions prone to seismic activity, the ability of a hangar to withstand earthquakes can mean the difference between minimal damage and catastrophic loss. In this blog, I'll share some key strategies and considerations for ensuring the seismic resistance of an aircraft hangar.
Understanding Seismic Forces
Before delving into the specific measures for seismic resistance, it's essential to understand the nature of seismic forces. Earthquakes generate ground motion that can cause structures to vibrate, sway, and experience significant lateral forces. These forces can be particularly challenging for large, open - span structures like aircraft hangars.
Seismic forces are typically characterized by their intensity, frequency content, and duration. The intensity of an earthquake is often measured using the Richter scale or the Modified Mercalli Intensity scale. Higher - intensity earthquakes produce stronger ground motion and greater forces on structures. The frequency content of seismic waves can also affect a structure's response. Structures have natural frequencies of vibration, and if the frequency of the seismic waves matches the natural frequency of the hangar, resonance can occur, leading to amplified vibrations and potentially severe damage.
Site Selection and Soil Investigation
One of the first steps in ensuring seismic resistance is proper site selection. Avoiding areas with high seismic hazard, such as near active fault lines, is ideal. However, in many cases, this may not be feasible due to airport location requirements. In such situations, a detailed soil investigation is crucial.
The type of soil beneath the hangar can significantly affect its seismic response. Soft, cohesive soils tend to amplify seismic waves, while dense, granular soils provide better support and less amplification. A geotechnical engineer should conduct a comprehensive soil investigation to determine the soil properties, including its bearing capacity, shear strength, and liquefaction potential. If the soil is found to be prone to liquefaction, which is the loss of soil strength during an earthquake, ground improvement techniques such as soil compaction, grouting, or the installation of deep foundations may be necessary.
Structural Design Considerations
Structural System Selection
The choice of structural system plays a vital role in seismic resistance. Steel structures are often preferred for aircraft hangars due to their high strength - to - weight ratio, ductility, and ease of construction. A well - designed steel frame can absorb and dissipate seismic energy through plastic deformation.


For large - span aircraft hangars, portal frame systems are commonly used. These systems consist of rigid frames with columns and rafters connected by moment - resisting connections. The frames can be designed to resist lateral forces through the development of plastic hinges at critical locations. Another option is a space frame structure, which provides a more efficient use of materials and can offer better resistance to seismic forces in multiple directions.
Lateral Load - Resisting Systems
In addition to the primary structural system, aircraft hangars need effective lateral load - resisting systems. Bracing systems are commonly used to provide additional stiffness and strength against lateral forces. There are different types of bracing, including diagonal bracing, cross - bracing, and knee bracing. Diagonal bracing is the most common type and can be installed in the plane of the frame or in the walls of the hangar.
Shear walls can also be incorporated into the design to resist lateral forces. Shear walls are vertical elements that are designed to carry shear forces induced by earthquakes. They can be made of reinforced concrete or steel and are typically placed at strategic locations within the hangar to provide maximum resistance.
Connection Design
The connections between structural members are critical for seismic resistance. In a steel structure, bolted connections are often used due to their ease of installation and disassembly. However, the design of these connections must ensure that they can transfer forces effectively and maintain their integrity during an earthquake.
Welded connections can provide a more rigid and stronger connection, but they require careful quality control during fabrication and installation. The connections should be designed to have sufficient strength and ductility to allow for plastic deformation without failure.
Energy Dissipation Devices
To further enhance seismic resistance, energy dissipation devices can be incorporated into the hangar design. These devices are designed to absorb and dissipate seismic energy, reducing the forces transmitted to the main structural members.
One type of energy dissipation device is the viscous damper. Viscous dampers work by converting the kinetic energy of the structure's motion into heat through the flow of a viscous fluid. They can be installed at strategic locations within the hangar, such as in the bracing systems or between structural members.
Another option is the use of friction dampers. Friction dampers work by creating friction between two surfaces, which dissipates energy as the structure moves during an earthquake. These dampers can be designed to activate at a certain level of seismic force, providing additional resistance when needed.
Redundancy and Robustness
A redundant and robust structure is more likely to withstand an earthquake without complete collapse. Redundancy refers to the presence of multiple load - paths within the structure. In an aircraft hangar, this can be achieved by having multiple frames, bracing systems, and connections that can share the load in case one element fails.
Robustness is the ability of a structure to withstand local damage without experiencing disproportionate collapse. For example, if a single column in the hangar is damaged during an earthquake, the remaining structure should be able to redistribute the load and prevent a progressive collapse.
Construction Quality Control
Even with a well - designed structure, poor construction quality can compromise its seismic resistance. Strict quality control measures should be implemented during the construction process. This includes ensuring proper installation of structural members, connections, and energy dissipation devices.
Workers should be trained in seismic - resistant construction techniques, and regular inspections should be carried out by qualified engineers. Quality control of materials is also essential. The steel used in the hangar should meet the required standards for strength and ductility, and the concrete, if used, should have the appropriate mix design and curing conditions.
Maintenance and Monitoring
Once the hangar is constructed, regular maintenance and monitoring are necessary to ensure its continued seismic resistance. Maintenance should include inspections of the structural members, connections, and energy dissipation devices for signs of damage, corrosion, or wear. Any issues should be addressed promptly to prevent further deterioration.
Structural monitoring systems can also be installed to continuously monitor the hangar's response to seismic events and normal operating conditions. These systems can use sensors to measure parameters such as displacement, acceleration, and strain. The data collected can be used to assess the hangar's structural health and detect any potential problems early.
Conclusion
Ensuring the seismic resistance of an aircraft hangar requires a comprehensive approach that includes site selection, proper structural design, the use of energy dissipation devices, quality construction, and ongoing maintenance and monitoring. As an [your role in the company] of an aircraft hangar provider, I am committed to delivering high - quality hangars that can withstand seismic forces and protect valuable aircraft.
If you are in the market for an aircraft hangar and are concerned about seismic resistance, I encourage you to [mention the appropriate way for potential customers to reach out, e.g., contact our team for a consultation]. We have a range of products, including Large Prefabricated Steel Structure Workshop, Special Vehicle Garage, and Steel Structure Three-dimensional Garage, that can be customized to meet your specific seismic requirements.
References
- American Society of Civil Engineers (ASCE). (2016). Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7 - 16).
- International Building Code (IBC). (2018). International Code Council.
- National Earthquake Hazards Reduction Program (NEHRP). (2020). Recommended Seismic Design Provisions for New Buildings and Other Structures.